Thanks: 
Likes: HI
The mpc3503 and mpc3003 use the same package FW "D1475519K.pkg"
Am i correct with this going to NOP control panels??
thanks
Dislikes: 0
HI
The mpc3503 and mpc3003 use the same package FW "D1475519K.pkg"
Am i correct with this going to NOP control panels??
thanks
19K is non sop and 19M is the SOP version.Originally Posted by fshead
And yes...it's the same package for both models.
The "K" and "M" just refers to the versioning of the software.
K came out September 2017
M came out May 2018
N Came out June 2018
Thee is a difference between the NOP and SOP firmware so make sure you get the correct one.
And with some models, the version letter is the only difference in the file name of the module.
Yep...my only point was that as of THIS date those are the 2 versions up on the Ricoh site.
19K for NON SOP and 19M for SOP version
Just to make sure he doesn't turn the machine into a toaster
Oze, please note, I was replying to mincopier.Yep...my only point was that as of THIS date those are the 2 versions up on the Ricoh site.
19K for NON SOP and 19M for SOP version
Just to make sure he doesn't turn the machine into a toaster
All good Slim...
thanks all.
I try to double check FW as we dont need anymore "toasters"
Here is the screen shot of the NOP firmware for the MPC3503, take note that that 19L is the most recent for the package file.
Screen Shot 2018-12-31 at 9.09.15 AM.jpg
Here is the screen shot of the SOP firmware for the MPC3503, take not that 19N is the most recent for the package file.
Screen Shot 2018-12-31 at 9.09.04 AM.jpg
19N is the latest for SOP
19L is the latest for the NOP
Both screen shots are from the Ricoh firmware history site as of today.
A couple of things to remember with package firmware:
- It only replaces those modules that are not at current level, firmware that is current but corrupted will not be replaced
- It might not update peripherals.
Reply With Quote
Bookmarks