Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 19
MP4001 IOB board and PCDU connector
I have a dumb question here. Is the PCDU connector in the back of the cavity where the PCDU density sensor connects to connected to the IOB board or is this a separate part? I can't seem to find any information in the parts manual or the p2p. Any assistance for my blind eyes is appreciated.
-
Senior Tech
100+ Posts
- Rep Power
- 19
Re: MP4001 IOB board and PCDU connector
harness.jpg
Is it this thing?
-
Re: MP4001 IOB board and PCDU connector
Originally Posted by
Stormhammer
If you are referring to item 9, I believe that is the connection for the tray heater based on where it shows going to on the frame. Item 14, just off the top of what you posted is the connector. You can also find it on the Point to point for the MP 4002 D0095440.
-
Senior Tech
100+ Posts
- Rep Power
- 19
Re: MP4001 IOB board and PCDU connector
Must have partied too hard on New Year's. Can't explain how I missed that one. Thanks as always.
-
Re: MP4001 IOB board and PCDU connector
Hi
according to my point to point, on connector 213 - pin 13-16 connect to connector 66, which is labeled TD sensor? It connects on the IOB.
Attachment 41398
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks