Hello fellas ! I recived a ricoh cw 2200 as part of a payment,i work with ricoh copier since many years ago,but the question is: How could i loggin in the sp mode? I was trying with the both loggin but i couldnt do it ,anyone can help me? Anyone knows the right access for this model? ( is the only one wide format that i have) thank you all!!
Same SP access as previous Rich MFP's up to the 02 models.
NEVER ASSUME ANYTHING
It is possible to change the SP login code. If that has been done, you need to either contact that person or use factory SP mode.
Reset/ 806182/clear (holding) then while keep pressed # (special service)?
Or reset/107/clear (holding) then while keep pressed # (special seervice)?
I tryed with these but nothing happened
Because you are doing it wrong.Originally Posted by claudioterrible
Either Yellow 1 0 7 Red holding red until SP menu comes up or Yellow 8 0 6 1 8 2 Red holding red until SP menu comes up. If you then want to go into special SP mode hold the # while selecting and pressing the desired SP mode.
Sounds like the previous "owner" may have changed the SP Mode password. There is a way to reset it in Factory SP Mode, but I'm not putting that information out in the public forum. I'd suggest opening a trouble ticket with Ricoh help desk and let them walk you through it.
Normal SP access for this model is clear modes>107>hold down on clear/stop.
NEVER ASSUME ANYTHING
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks