Thanks:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 38
MPC4501 Replace photoconductor message
I have a machine that keeps calling for all photoconductors to be replaced. Was doing it every once in a while, & is now doing it after a few pages are run.
We've replaced the I/O board, BICU, HDD, Fax pwb, NVRAM, HV pwb, & power supply.
Anybody seen this happen or have an idea what might be causing it?
Thanks in advance...
-
Field Supervisor
500+ Posts
- Rep Power
- 38
Re: MPC4501 Replace photoconductor message
how many copies are on the photoconductors?
-
Trusted Tech
50+ Posts
- Rep Power
- 38
Re: MPC4501 Replace photoconductor message
They have been replaced individually as they caused print quality issues (so shouldn't all pop at once) & none of them are beyond their life.
-
Field Supervisor
500+ Posts
- Rep Power
- 38
Re: MPC4501 Replace photoconductor message
was the maint counter reset on all of them? i'm just asking cause thats some of the first things i'd look at if i were there.
-
Re: MPC4501 Replace photoconductor message
On your other post asking for P2P for this model you state the message is “set photoconductor”, not replace, so what is the correct message? If it is “set photoconductor” you have issue with wiring to TD sensor.
-
Trusted Tech
50+ Posts
- Rep Power
- 38
Re: MPC4501 Replace photoconductor message
Sorry... Its "replace photoconductor"
Ill change the other post.
-
Re: MPC4501 Replace photoconductor message
Has it done lots of A3 size? this will reduce PM life. Try clear PM ciunter and see what happens.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks