Dislikes:
0
-
MPC6003 Jam code 001
I have run into this on older machines with door switches but this doesn't seem to be the case as of yet. Has anyone run into J001 on these machines yet? Thanks for your help!
-
Re: MPC6003 Jam code 001
Does it show where the jam is? I read about a machine showing J-001 also showing jam in C, turned out to be the interlock sensor on the duplex door was failing.
-
Re: MPC6003 Jam code 001
I believe J001 is a jam at power on.
-
Re: MPC6003 Jam code 001
Stamp holder door on the ADF is probably open. Close it and you should be good to go.
-
Re: MPC6003 Jam code 001
Previously just checked continuity on door switches (checked ok). Replaced front and side door switches and all is well.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks