Smart Panel 'Scan' app - Different than 'Quick Scan'

**gregblatz** · 01-29-2019

Hi All,
I have heard that there is a new apk for scanning. This apk is different than the 'Quick Scan' app.

The problem with the quick scan app is that there are too many steps to define your scan destination, and once you have selected a scan destination and sent your scan, the quick scan app returns with an empty destination, therefore the user has to step through the destination selection for each job.

I would like to try this new version of the app to see if the workflow is better.

Is anyone aware of what I am referring too and if so, do you have the zipped apk/dalp file?

Thanks,

**Mark Bbb** · 01-29-2019

Scanner sp 1012 // 0 = destination stays on // 1 = reset

**TonerMunkeh** · 01-29-2019

I still find the classic scanner app so much less hassle. Set the defaults to 300dpi and Auto Colour Select, hit user, press start. That's it.

**JDYAL** · 01-29-2019

I'm with tonermunkeh Classic scanner is the way to go especially if the customer had a Ricoh prior. The problem is that i heard that they were phasing out the classic versions. Has anyone else heard this?

**copier tech** · 01-29-2019

Originally Posted by JDYAL

I'm with tonermunkeh Classic scanner is the way to go especially if the customer had a Ricoh prior. The problem is that i heard that they were phasing out the classic versions. Has anyone else heard this?

If this is true might be worth saving this classic apps just in case!

**Tecnicopia** · 01-29-2019

Originally Posted by JDYAL

I'm with tonermunkeh Classic scanner is the way to go especially if the customer had a Ricoh prior. The problem is that i heard that they were phasing out the classic versions. Has anyone else heard this?

The new IMC still have the classic apps.

Enviado desde mi Redmi 4X mediante Tapatalk

**copier tech** · 01-29-2019

Originally Posted by Tecnicopia

The new IMC still have the classic apps.

Enviado desde mi Redmi 4X mediante Tapatalk

Not seen one yet, not sure if they’re available in the UK?

**gregblatz** · 01-29-2019

Originally Posted by Mark Bbb

Scanner sp 1012 // 0 = destination stays on // 1 = reset

This is a good suggestion and I will try it out.
Thank you.

**gregblatz** · 01-29-2019

Thanks for the feedback all.
I agree the classic is the way to go but we have a functionality requirement that makes me have to keep digging for this elusive new scanner apk.

Also thank you for the suggestion to persist the destination like this:
Scanner sp 1012 // 0 = destination stays on // 1 = reset

I will give this a try, I hope it applies to the quick scanner app and not just the classic one.

I'm still looking for information in regards to a rumored new Android APK that has a redesigned scanner interface. From what I have heard, this is a new scanner UI that is an android APK therefore it should be different than the classic scanner interface.