Ok so I have an sc 670-01 which only happens when coming out of power saving. These are the things I have done so far. I do have the TSB for this but I'm not convinced replacing all the boards is the answer....hence why I'm posting. The machine has the smart op m3 control panel. I have updated the firmware for the panel to version 1.53 which is the latest. I have updated all machine firmware. Before I updated the firmware the machine would not even come out of power saving and the data light would not flash. Since updating it will come out of power saving but then gives sc 670-01. Has anyone seen this or have any insight that could be helpful. Any help is much appreciated
Bookmarks