Originally Posted by
FrohnB
Usually the PM Call message will come on at or after 45,000 when a part probably needs to be replaced. At least that's what the PCDU's are rated for. Have never actually set these PM alarms before.
According to the manual, The number you set 5-501 to should be multiplied by 1,000. So 5 = 5,000 and 5,000 = 5,000,000!!
Are you wanting to go to the customers location every 5,000 prints for a specific reason??? These machines generally run the full 45k Maint. Interval without needing attention.
EDIT: Maybe try turning 5-507-005 to 1, Supply alarm for Drum.
Bookmarks