i can't get rid of this message "replace fusing belt now" i reset pm count, 3701, 7803, 7622, and it shows the new date in 7950. what am i missing
i can't get rid of this message "replace fusing belt now" i reset pm count, 3701, 7803, 7622, and it shows the new date in 7950. what am i missing
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
The manual just says 5810-002 3701-116. If thats not working you may have to use the "new unit detection fuse" that comes with the heat sleeve.
did 3701 and 5810-2 witch failed. the 02,s have the fuse not the 03's right
You don't need a fuse that is just for SC544 errors etc. SP5810-1/2 is to reset an fuser ERROR not a PM COUNTER.
Depending on your firmware version when you first enter SP mode do you see a "PM Counter" tab? if so use that to reset the fuser sleeve AND pressure roller counters.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks