C5502 fuser film asm in C3502

[tinfox]

check the metal fins on the transfer roller..
I had one do that as i too thought fuser 1st

I went back to the account to check the fins, but there weren't any.
.IMG_20190318_094247573.jpg

[fshead]

I thought I read somewhere here that the D144-4272 C5502 asm will work in the C3502, but not vice versa?

SO is it confirmed a mpc5502 sleeve D144-4032 will work in a mpc3502?

[fshead]

You can use the SPC complete fuser unit cheaper than just the sleeeve.

i ve swapped out the c430dn fusers for the mpc400 by swapping the 3 loop connector.
Is that the same with the spc830 fuser?
I Could not find a cheap c830 fuser but have a low meter perfect pull i could use...