Thanks:
0
Dislikes:
0
-
-
Re: MP301 Right Cover refuses to open
The reason there are no threads on this is because it's Very normal.
Right cover is much more 'stiff' than in previous machines. It's just the way it is. I always have my customer open and close it a couple of times when I install a machine so they are aware of it. I'm not sure why this is a problem for you.
-
Trusted Tech
50+ Posts
- Rep Power
- 33
Re: MP301 Right Cover refuses to open
So it is normal to have the side with the lock handle disengage first and have to tug at it quite hard after that for the whole cover to disengage... Somehow I felt this could not be cos the earlier machines like 171 & 201 did not have a "hard to disengage" side cover.
Telling customer seems OK though if it was his first machine, but to convince him that has transitioned from 201 to 301 is tough.
Appreciate the response though. Thanks
-
Re: MP301 Right Cover refuses to open
Why is it so difficult to show them " your old one did this, but the new one does this" ?
If CAPS will help make it more clear:
IT'S NORMAL
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks