Results 1 to 6 of 6
  1. #1
    Service Manager 1,000+ Posts
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,279
    Rep Power
    40

    sp 5210sr staple unit troubleshooting

    hi
    i just pulled the panels on this unit that
    had staple unit constantly firing from broken wire grounding to frame .
    I removed all excess staples,staple unit,respliced the broken wires.
    Upon assembly i ran some teat runs and machine does not staple nor does the exit motor turn.
    It was a black wire below the sorter tray.
    I have not pulled the covers again but you think that short took out a board
    Attached Images Attached Images

  2. #2
    Service Manager 1,000+ Posts
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,279
    Rep Power
    40

    Re: sp 5210sr staple unit troubleshooting

    there is no history on this machine as i just bought it and knew it had some issues before buying it.

  3. #3
    Service Manager 1,000+ Posts
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,279
    Rep Power
    40

    Re: sp 5210sr staple unit troubleshooting

    i decided to try a sorter brd but dont have any for the sp 5210 sr but do have for a mpc400sr which look the same..
    I will lay them side by side and ck.
    If not sorter brd then i guess BICU then.
    The adf s are identical too..anyone try to cross over models?

  4. #4
    Field Supervisor 500+ Posts
    Join Date
    Apr 2010
    Location
    the west
    Posts
    637
    Rep Power
    28

    Re: sp 5210sr staple unit troubleshooting

    Just because they look the same, the boards may not be interchangeable. Check the part numbers. You may need to replace the harness, not just repair it.

  5. #5
    Copier Combobulator 500+ Posts
    Join Date
    May 2016
    Posts
    564
    Rep Power
    15

    Re: sp 5210sr staple unit troubleshooting

    Quote Originally Posted by fshead View Post
    i decided to try a sorter brd but dont have any for the sp 5210 sr but do have for a mpc400sr which look the same..
    I will lay them side by side and ck.
    If not sorter brd then i guess BICU then.
    The adf s are identical too..anyone try to cross over models?
    According to the parts manuals the main control PCB for the finishers on both of those has the same part number M3665124. They also have the same firmware files. That said I'd take a picture of the dip switch settings on the old 5210sr board and make sure your donor board matches before installing it.

  6. #6
    Service Manager 1,000+ Posts
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,279
    Rep Power
    40

    Re: sp 5210sr staple unit troubleshooting

    thanks.
    i figured i d match the dip switches from the original i will be swapping out..

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here