can i use a mpc5502 fuser sleeve on a mpc3502?

[fshead]

hi..
anyone try using a mpc5502 sleeve in a mpc3502?
d144-0032 is the faster unit sleeve

[tomcatt]

Yes. I have with no problems.

[fshead]

Yes. I have with no problems.

thanks..
I dont want to pop one in and start dealing with fuser codes..
I see a lot of different part numbers for them.
Is one any different or better than the other?
Or are they all the same?
thanks

[davel]

Higher wattage lamps in 5502

[fshead]

i would think higher is better...
I can see not using a mpc3002 on a mpc5502............

[slimslob]

thanks..
I dont want to pop one in and start dealing with fuser codes..
I see a lot of different part numbers for them.
Is one any different or better than the other?
Or are they all the same?
thanks

Just be sure to order one for your global market. 220v lamps do not get hot enough on 125v. 125v lamps burn out on 220v.

[fshead]

Just be sure to order one for your global market. 220v lamps do not get hot enough on 125v. 125v lamps burn out on 220v.

i have to look at my mpc3502 fuser cores i saved to see if they show voltage..
I would assume EU part number would be different than NA.

[keithxxiii]

Yep they really are different. Here's the part numbers for 3502 sleeves.

NA: D1424272
EU: D1424273
CN: D1424046

[fshead]

THANKS
i usually will look at precision rollers online catalog and compare..

some numbers they show are " D1444272", D144-4032, D1444081,D1444045

I didnt know if there was a modified mpc5502 fuser sleeve like they did with the mpc3502 sleeve..
There is a lot of old "new"parts kicking around on the internet..

[Athlontini]

I used to get fuser codes when I (accidentally) used to put 5502 sleeves in a 3002/3502. They were really intermittent, but they were there. On the other hand, I've run across machines where another tech did this same thing, and they were working fine.

Short answer: You COULD, but not worth the risk/headache if you get call backs.