Results 1 to 5 of 5
  1. #1
    Field Supervisor 500+ Posts
    Join Date
    Jun 2009
    Location
    /Florida
    Posts
    552
    Rep Power
    38

    Mp301 admin password changed

    i pick up a mp301 yesterday. they have change admin/supervisor information. They have service lock is on. i can get into service mode using the 107 or 143. try web monitor no luck there. Does anybody know how to get around this. I hope didn't just buy a boat anchor. I know can always use for parts.

  2. #2
    How'd ya manage that? 1,000+ Posts
    Join Date
    Dec 2009
    Location
    NoneOfYoiurBusinessVille
    Posts
    1,026
    Rep Power
    60

    Re: Mp301 admin password changed

    If admin and supervisor have been changed and you can't access SP modes (SP mode lock on in User Tools or other issue) then a change of NVRAM will be your only recourse.

  3. #3
    Field Supervisor 500+ Posts
    Join Date
    Jun 2009
    Location
    /Florida
    Posts
    552
    Rep Power
    38

    Re: Mp301 admin password changed

    Quote Originally Posted by zed255 View Post
    If admin and supervisor have been changed and you can't access SP modes (SP mode lock on in User Tools or other issue) then a change of NVRAM will be your only recourse.
    Thanks for the reply . will have to go that route.

  4. #4
    Field Supervisor 500+ Posts
    Join Date
    Jun 2009
    Location
    /Florida
    Posts
    552
    Rep Power
    38

    Re: Mp301 admin password changed

    i found out it was my java sd card causing problem. If i try going into service mode before everything comes up could get in to it. So i thought about looking and decide to i pulled java sd card and it work.

  5. #5
    Retired 10,000+ Posts
    Mp301 admin password changed

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,074
    Rep Power
    987

    Re: Mp301 admin password changed

    Quote Originally Posted by COPIERMAN View Post
    i found out it was my java sd card causing problem. If i try going into service mode before everything comes up could get in to it. So i thought about looking and decide to i pulled java sd card and it work.
    That is quite common with Ricoh. Until JAVA has finished loading, you can get into User Tool menu but the only thing you can access is Counter. Same with SP mode, you may be able to get to the SP main menu but nothing else. JAVA can take 5 minutes or more to load.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here