Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. #1
    Technician
    Join Date
    Apr 2014
    Posts
    29
    Rep Power
    11

    MP C2003 SC554-02 after change heating sleeve unit

    Hi, i changed the heating sleeve unit on a MP C2003 because riven on the roller (only 100k copies), after that, reset code without using the fuse that comes with the unit, only reset with sp 5810, test the machine and work perfect, but now, 1 week later, the customer call again with the same code SC554-02....

    The manual says " To cancel SC544-02/554-02, it is necessary to replace the fusing unit or install an intact new unit detection fuse. If you will cancel these SCs by installing a new unit detection fuse, follow the instruction at the end of this procedure. If you are replacing the heating sleeve unit for PM or any reason other than canceling these SCs, you can discard the fuse that is packed with the new heating sleeve unit."

    Must i use the fuse to reset code? follow manual step to step, and no problems during the procedure...

  2. #2
    SanDiegoCopierRepair.com 500+ Posts
    MP C2003 SC554-02 after change heating sleeve unit

    blazebusiness's Avatar
    Join Date
    Apr 2010
    Location
    From NY--- live in San Diego , Ca.
    Posts
    966
    Rep Power
    32

    Re: MP C2003 SC554-02 after change heating sleeve unit

    Quote Originally Posted by menosmola View Post
    Hi, i changed the heating sleeve unit on a MP C2003 because riven on the roller (only 100k copies), after that, reset code without using the fuse that comes with the unit, only reset with sp 5810, test the machine and work perfect, but now, 1 week later, the customer call again with the same code SC554-02....

    The manual says " To cancel SC544-02/554-02, it is necessary to replace the fusing unit or install an intact new unit detection fuse. If you will cancel these SCs by installing a new unit detection fuse, follow the instruction at the end of this procedure. If you are replacing the heating sleeve unit for PM or any reason other than canceling these SCs, you can discard the fuse that is packed with the new heating sleeve unit."

    Must i use the fuse to reset code? follow manual step to step, and no problems during the procedure...
    Ricoh MP C5503 SC544-02 code my post from 2015 that explains issues like this.
    Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

  3. #3
    Technician
    Join Date
    Apr 2014
    Posts
    29
    Rep Power
    11

    Re: MP C2003 SC554-02 after change heating sleeve unit

    Quote Originally Posted by blazebusiness View Post
    Ricoh MP C5503 SC544-02 code my post from 2015 that explains issues like this.
    So... i must use the fuse... and the question is? if i have not used the fuse, how the machine works perfectly 1 week without sc codes??

  4. #4
    Service Manager 2,500+ Posts
    MP C2003 SC554-02 after change heating sleeve unit

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    3,407
    Rep Power
    62

    Re: MP C2003 SC554-02 after change heating sleeve unit

    Quote Originally Posted by menosmola View Post
    So... i must use the fuse... and the question is? if i have not used the fuse, how the machine works perfectly 1 week without sc codes??
    Go back on site & have a look, mabe the customer has damaged the sleeve clearing a jam etc?
    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  5. #5
    SanDiegoCopierRepair.com 500+ Posts
    MP C2003 SC554-02 after change heating sleeve unit

    blazebusiness's Avatar
    Join Date
    Apr 2010
    Location
    From NY--- live in San Diego , Ca.
    Posts
    966
    Rep Power
    32

    Re: MP C2003 SC554-02 after change heating sleeve unit

    Quote Originally Posted by menosmola View Post
    So... i must use the fuse... and the question is? if i have not used the fuse, how the machine works perfectly 1 week without sc codes??
    Certainly interesting......you did not use the reset fuse so, did you fail to reset the parts pm counter instead in SP mode after replacing the sleeve unit?
    Maybe the fuse resets the PM counter and if you donít use the fuse you have to reset the PM counter or it reaches end of life and throws a code again? (this is just a wild guess......still not sure what code you initially had. Rather than rely on your memory you can check the SC code history and see what codes are listed. Maybe the first code you ran into was a code that does not require a fuse to reset. Then the 554-02 code came up and that does indeed need the fuse. )
    Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

  6. #6
    Technician
    Join Date
    Apr 2014
    Posts
    29
    Rep Power
    11

    Re: MP C2003 SC554-02 after change heating sleeve unit

    Quote Originally Posted by copier tech View Post
    Go back on site & have a look, mabe the customer has damaged the sleeve clearing a jam etc?
    Yes... i think you are right.....

  7. #7
    Technician
    Join Date
    Apr 2014
    Posts
    29
    Rep Power
    11

    Re: MP C2003 SC554-02 after change heating sleeve unit

    Quote Originally Posted by blazebusiness View Post
    Certainly interesting......you did not use the reset fuse so, did you fail to reset the parts pm counter instead in SP mode after replacing the sleeve unit?
    Maybe the fuse resets the PM counter and if you donít use the fuse you have to reset the PM counter or it reaches end of life and throws a code again? (this is just a wild guess......still not sure what code you initially had. Rather than rely on your memory you can check the SC code history and see what codes are listed. Maybe the first code you ran into was a code that does not require a fuse to reset. Then the 554-02 code came up and that does indeed need the fuse. )
    Thanks for all, to be honest, i dont remenber the first code exactly, but i think was 554-2... when go back and have a look i will post wtf is happend... :P

  8. #8
    Service Manager 1,000+ Posts
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,424
    Rep Power
    44

    Re: MP C2003 SC554-02 after change heating sleeve unit

    Quote Originally Posted by menosmola View Post
    Thanks for all, to be honest, i dont remenber the first code exactly, but i think was 554-2... when go back and have a look i will post wtf is happend... :P
    you can make a reset Jig,i ve done it :ITS ON THIS SITE:and i am not paying $30 for a stupid pico fuse

  9. #9
    Technician
    Join Date
    Apr 2014
    Posts
    29
    Rep Power
    11

    Re: MP C2003 SC554-02 after change heating sleeve unit

    Quote Originally Posted by fshead View Post
    you can make a reset Jig,i ve done it :ITS ON THIS SITE:and i am not paying $30 for a stupid pico fuse
    I have the fuse, i did not use it when i change the heating sleeve unit...
    Must i use the fuse every time i change the heating sleeve unit???

  10. #10
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    9,309
    Rep Power
    203

    Re: MP C2003 SC554-02 after change heating sleeve unit

    The fuse is only needed to reset SC codes as listed in the service manual. Replacement for any other reason does not require the fuse. Hand onto the fuse as it might be needed should an error occurs as a result of something that does not require the replacement of the sleeve, such as a bad thermistor or thermostat.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here