Hoi,
Only need to file off connector?
Thanks for your answer.
Hoi,
Only need to file off connector?
Thanks for your answer.
Just have a look on this post:
Ricoh MPc4502 PCU
Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com
The black pcu can not be used for colour pcu at all !
I have already filed of the connector, can i still use it as a black pcu?
You can use D089 as a black drum still.
You want to use D02922xx (black drum) as a Color drum. File corner of connector and swap wires 1 & 2 (I think they're the only wires that cross over each other on the harness, when switched none of the wires should be "crossed"). Plus you will have to modify the Base Plate at the rear of the machine. There's a "tab" with a post on it that will prevent the D029 drum from seating all the way. Just grab a pair of pliers and bend it back and forth until it breaks off. Then "flatten out" the remainder as good as you can.
Last edited by FrohnB; 04-15-2019 at 02:26 PM. Reason: more info
So, i used a mpc2800 cyan pcu to connect to a mpc3001 cyan developbox.
The connector of the pcu was already filed off (standard color), I swapped wires 1 & 2, I have modified the base plate in the mpc3001...
put it all in the machine AND
"error in photoconductor unit position" (i have translated in from Dutch)
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks