Wasn’t the AP 600 an A3 machine?
check the plug on the fusers look for a jumper in a different position.
Wasn’t the AP 600 an A3 machine?
check the plug on the fusers look for a jumper in a different position.
Check the connector wiring against the point-to-point diagram. It may be partially wired for the wrong voltage. 115V fusing lamp and thermostat between pins 1&2, jumper between pins B1 and B3. 230V fusing lamp and thermostat between pins 2&3, jumper between pins B1 and B4. If either or both those sets are wrong you will get the Fuser Not Set Correctly message.
Hey Oze, I like your axes. Just ordered me an Epi Les Paul Studio. I'm excited, can't wait to get that slab of mahogany. (sorry, off topic)
NEVER ASSUME ANYTHING
Bookmarks