Can I use a mpc4502 control panel on a mpc3002?

[fshead]

hi
I have a mpc3002 that has been sitting wth a shattered control panel.
I changed the touch screen but the 2nd brd behind it shows cracks too and
I am trying to get it running to test my batch of fuser units i plan on rebuilding
to have on the shelf when busy.
I dont have any mpc4502 in the field but found a cheap working used one.
Do you see anything that can make it "not" worth a chance to try?

[FrohnB]

No. C3002 = D1421411 and C4502/5502 = D1441401. Have tried it before and get a code or error message or non start of screen or something, can't remember exactly, but they don't cross over.

[fshead]

No. C3002 = D1421411 and C4502/5502 = D1441401. Have tried it before and get a code or error message or non start of screen or something, can't remember exactly, but they don't cross over.

thanks
do you think the "video brd" crosses over?

i gotta ck the parts manual........

[FrohnB]

PCB: OP R and L (under the keys and such) are the same.
LCDC: TFT: WVGA are the same between C3002 and 4502.
Touch Panels are different D1291422 for 4502 and D1291421 for 3002.
PCB: LCDC: FT boards are different. D1441441 C4502 and D1421441 C3002. (I think this is the board you are talking about that is also cracked? Sits right underneath the Touch screen).

[fshead]

PCB: OP R and L (under the keys and such) are the same.
LCDC: TFT: WVGA are the same between C3002 and 4502.
Touch Panels are different D1291422 for 4502 and D1291421 for 3002.
PCB: LCDC: FT boards are different. D1441441 C4502 and D1421441 C3002. (I think this is the board you are talking about that is also cracked? Sits right underneath the Touch screen).

thank you..
I sometimes get lost looking thru the parts manual...

[francisco]

hi
I have a mpc3002 that has been sitting wth a shattered control panel.
I changed the touch screen but the 2nd brd behind it shows cracks too and
I am trying to get it running to test my batch of fuser units i plan on rebuilding
to have on the shelf when busy.
I dont have any mpc4502 in the field but found a cheap working used one.
Do you see anything that can make it "not" worth a chance to try?

yes you can
just put the right panel firmware.
i had tried and it works

[fshead]

yes you can
just put the right panel firmware.
i had tried and it works

hi
Are you 100% sure as I have no need for a mpc5502 panel.
Previous posts say you get a code or nonresponse of screen..
Did that occur and doing mpc3002 op panel FW brought it back
and functioning on a mpc3002?

[francisco]

hi
Are you 100% sure as I have no need for a mpc5502 panel.
Previous posts say you get a code or nonresponse of screen..
Did that occur and doing mpc3002 op panel FW brought it back
and functioning on a mpc3002?

100% sure
FW MPC3002
D1421492F(op panel) D1421499C(lang)

FW MPC5502
D1441492F and D1441499C

[fshead]

thanks I APPRECIATE THAT...........

[FrohnB]

thanks I APPRECIATE THAT...........

Let us know if it works! Inquiring minds would like to know.