Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Service Manager 1,000+ Posts
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,392
    Rep Power
    42

    Can I use a mpc4502 control panel on a mpc3002?

    hi
    I have a mpc3002 that has been sitting wth a shattered control panel.
    I changed the touch screen but the 2nd brd behind it shows cracks too and
    I am trying to get it running to test my batch of fuser units i plan on rebuilding
    to have on the shelf when busy.
    I dont have any mpc4502 in the field but found a cheap working used one.
    Do you see anything that can make it "not" worth a chance to try?

  2. #2
    Senior Tech 100+ Posts FrohnB's Avatar
    Join Date
    Jul 2017
    Location
    Fremont, Nebraska
    Posts
    227
    Rep Power
    8

    Re: Can I use a mpc4502 control panel on a mpc3002?

    No. C3002 = D1421411 and C4502/5502 = D1441401. Have tried it before and get a code or error message or non start of screen or something, can't remember exactly, but they don't cross over.

  3. #3
    Service Manager 1,000+ Posts
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,392
    Rep Power
    42

    Re: Can I use a mpc4502 control panel on a mpc3002?

    Quote Originally Posted by FrohnB View Post
    No. C3002 = D1421411 and C4502/5502 = D1441401. Have tried it before and get a code or error message or non start of screen or something, can't remember exactly, but they don't cross over.
    thanks
    do you think the "video brd" crosses over?

    i gotta ck the parts manual........

  4. #4
    Senior Tech 100+ Posts FrohnB's Avatar
    Join Date
    Jul 2017
    Location
    Fremont, Nebraska
    Posts
    227
    Rep Power
    8

    Re: Can I use a mpc4502 control panel on a mpc3002?

    PCB: OP R and L (under the keys and such) are the same.
    LCDC: TFT: WVGA are the same between C3002 and 4502.
    Touch Panels are different D1291422 for 4502 and D1291421 for 3002.
    PCB: LCDC: FT boards are different. D1441441 C4502 and D1421441 C3002. (I think this is the board you are talking about that is also cracked? Sits right underneath the Touch screen).
    Last edited by FrohnB; 3 Weeks Ago at 05:51 PM. Reason: more info

  5. #5
    Service Manager 1,000+ Posts
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,392
    Rep Power
    42

    Re: Can I use a mpc4502 control panel on a mpc3002?

    Quote Originally Posted by FrohnB View Post
    PCB: OP R and L (under the keys and such) are the same.
    LCDC: TFT: WVGA are the same between C3002 and 4502.
    Touch Panels are different D1291422 for 4502 and D1291421 for 3002.
    PCB: LCDC: FT boards are different. D1441441 C4502 and D1421441 C3002. (I think this is the board you are talking about that is also cracked? Sits right underneath the Touch screen).
    thank you..
    I sometimes get lost looking thru the parts manual...

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Nov 2009
    Location
    porto
    Posts
    150
    Rep Power
    22

    Re: Can I use a mpc4502 control panel on a mpc3002?

    Quote Originally Posted by fshead View Post
    hi
    I have a mpc3002 that has been sitting wth a shattered control panel.
    I changed the touch screen but the 2nd brd behind it shows cracks too and
    I am trying to get it running to test my batch of fuser units i plan on rebuilding
    to have on the shelf when busy.
    I dont have any mpc4502 in the field but found a cheap working used one.
    Do you see anything that can make it "not" worth a chance to try?
    yes you can
    just put the right panel firmware.
    i had tried and it works

  7. #7
    Service Manager 1,000+ Posts
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,392
    Rep Power
    42

    Re: Can I use a mpc4502 control panel on a mpc3002?

    Quote Originally Posted by francisco View Post
    yes you can
    just put the right panel firmware.
    i had tried and it works
    hi
    Are you 100% sure as I have no need for a mpc5502 panel.
    Previous posts say you get a code or nonresponse of screen..
    Did that occur and doing mpc3002 op panel FW brought it back
    and functioning on a mpc3002?

  8. #8
    Senior Tech 100+ Posts
    Join Date
    Nov 2009
    Location
    porto
    Posts
    150
    Rep Power
    22

    Re: Can I use a mpc4502 control panel on a mpc3002?

    Quote Originally Posted by fshead View Post
    hi
    Are you 100% sure as I have no need for a mpc5502 panel.
    Previous posts say you get a code or nonresponse of screen..
    Did that occur and doing mpc3002 op panel FW brought it back
    and functioning on a mpc3002?

    100% sure
    FW MPC3002
    D1421492F(op panel) D1421499C(lang)

    FW MPC5502
    D1441492F and D1441499C

  9. #9
    Service Manager 1,000+ Posts
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,392
    Rep Power
    42

    Re: Can I use a mpc4502 control panel on a mpc3002?

    thanks I APPRECIATE THAT...........

  10. #10
    Senior Tech 100+ Posts FrohnB's Avatar
    Join Date
    Jul 2017
    Location
    Fremont, Nebraska
    Posts
    227
    Rep Power
    8

    Re: Can I use a mpc4502 control panel on a mpc3002?

    Quote Originally Posted by fshead View Post
    thanks I APPRECIATE THAT...........
    Let us know if it works! Inquiring minds would like to know.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here