Thanks:
0
Dislikes:
0
-
Technician
- Rep Power
- 12
MP7502 freezing up
I have a issue with the machine showing copying off the glass or DF but just idling for 3-5 minutes then pops a 955 code tried FW, controller, memory, HDD, IPU, CCD, SIOB.....prints/Fax in with no issue....
-
Re: MP7502 freezing up
I read this on another forum,
harness D6095500(IPU to CIS) was partially unplugged from the CIS.
Good luck, sounds like a tough one.
-
Re: MP7502 freezing up
Ok, when you replaced the controller, did you also swap the nvram on the controller and the eprom on the BCU? Failure to do these things will give you that sc code.
-
Senior Tech
100+ Posts
- Rep Power
- 32
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks