Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19
  1. #11
    Trusted Tech 50+ Posts
    Join Date
    Jun 2017
    Location
    George
    Posts
    72
    Rep Power
    14

    Re: MPC300 Image problem

    Hi

    I have never played around with fuser motor speeds. Do you know the SP Mode for this and what you suggest i must make the value?

  2. #12
    Service Manager 5,000+ Posts
    MPC300 Image problem

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: MPC300 Image problem

    If as you say the same fault happens on 4 separate printers the issue is the document surely!?
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  3. #13
    Trusted Tech 50+ Posts
    Join Date
    Jun 2017
    Location
    George
    Posts
    72
    Rep Power
    14

    Re: MPC300 Image problem

    Quote Originally Posted by copier tech View Post
    If as you say the same fault happens on 4 separate printers the issue is the document surely!?
    Must be, but why only on the MPC300s and not on the other printers?

  4. #14
    Master Of The Obvious 10,000+ Posts
    MPC300 Image problem

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: MPC300 Image problem

    Quote Originally Posted by Voltageza View Post
    Hi

    I have never played around with fuser motor speeds. Do you know the SP Mode for this and what you suggest i must make the value?
    Sorry, I haven't any experience with this model. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #15
    Senior Tech. 2,500+ Posts NeoMatrix's Avatar
    Join Date
    Nov 2010
    Location
    Sunshine State QLD.
    Posts
    3,514
    Rep Power
    104

    Re: MPC300 Image problem

    Re. four different printers with the same printed page fault??The only thing common to all those is the PDF file sent to the printer. Find the scanner machine that created the PDF, clean the optics, probably service the machine. HTH sent via phone.
    Inauguration to the "AI cancel-culture" fraternity 1997...
    •••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••

  6. #16
    Service Manager 1,000+ Posts
    MPC300 Image problem


    Join Date
    Nov 2007
    Location
    New Jersey
    Posts
    1,661
    Rep Power
    86

    Re: MPC300 Image problem

    Quote Originally Posted by Voltageza View Post
    Hi

    The image is a PDF. I have saved it as a jpeg as well but does the same. There is other images like this also with blue sky that does the same.
    If i print the image on a MPC2004 and MPC8002 in comes out fine.
    A dirty laser will cause a line along the long edge of the page.

    Thanks
    ok, it's not the test original if it prints fine on MPC2004 and MPC8002

    I'd go with adjusting the fuser motor speed like was suggested to you.

    Give it a try, let us know.

    If you can't figure out how to do that, then you need to place a service call on the machine.

  7. #17
    Senior Tech. 2,500+ Posts NeoMatrix's Avatar
    Join Date
    Nov 2010
    Location
    Sunshine State QLD.
    Posts
    3,514
    Rep Power
    104

    Re: MPC300 Image problem

    Quote Originally Posted by anothertech View Post
    ok, it's not the test original if it prints fine on MPC2004 and MPC8002I'd go with adjusting the fuser motor speed like was suggested to you.Give it a try, let us know.If you can't figure out how to do that, then you need to place a service call on the machine.
    Are you possibly using old prerun test page copies in the paper trays?Say,high volume jamb test run copies that a tech put back into recycle bin stock?Sent via phone.
    Inauguration to the "AI cancel-culture" fraternity 1997...
    •••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••

  8. #18
    Service Manager 2,500+ Posts
    MPC300 Image problem

    sandmanmac's Avatar
    Join Date
    Feb 2009
    Location
    Toronto, ON
    Posts
    3,885
    Rep Power
    159

    Re: MPC300 Image problem

    You may just have to live with it.
    There was a recent discussion about an SP C430 (Same engine) that has a similar flaw, only with magenta, that doesn't seem to have a remedy.

    You may find it interesting: Dark magenta line exactly same on 2 SPC440 and 1 SPC430 printers

  9. #19
    Trusted Tech 50+ Posts
    Join Date
    Jun 2017
    Location
    George
    Posts
    72
    Rep Power
    14

    Re: MPC300 Image problem

    9C745831-D164-4643-8455-73E8F6BA42C7.jpg

    Test print with density at 7. Left is leading edge. All colour do the same in the same spot

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here