If you know how to color balance...
4.19.6 PRINTER GAMMA CORRECTION
The ACC is usually sufficient to adjust the color balance to get the best print output. You
only need the printer gamma correction to fine-tune to meet user requirements.
Use SP modes if you want to modify the printer gamma curve created with ACC. You can adjust
the gamma data for the following:
Highlight
Middle
Shadow areas
IDmax.
The adjustable range is from 0 to 30 (31 steps).
Copy Mode
Page 4-177 in the Service Manual. If you don't know how a color wheel works, you see adjust color in the user tools. but that will go away once you calibrate.
Bookmarks