Originally Posted by eddy out My PSG says 400k is the expected life That would be for the K PCU. 600K for the K development unit. 270K for color PCU and development unit. Fusing and PTR are 400K. ITB unit is 600K ITB cleaning is 300K
Originally Posted by eddy out My PSG says 400k is the expected life 400k is probably for 80g paper with fairly low coverage with in a certain time frame with the fusing temperature set to default. How long the runs were how often the device was warmed up to ready (even if no prints made)
Fuser sleeve wear is always dependent from which paper customer is using, like thickness and quality. Moisture is always an (negative) issue.
View Tag Cloud
Forum Rules
Bookmarks