Google Print MP C305SPF, FW update ?

[Fremalea]

SC868-00 would be a device error not a card error. Are you sure you have the SD card in the correct SD slot?

Yes, I'm sure. Bottom slot

[slimslob]

Yes, I'm sure. Bottom slot

For a device error:
1. Turn off the main power switch and check if the contact with the SD
card slot and SD card is normal.
2. If the contact is normal, insert the SD card into the slot and turn on
the main power switch to check if the error occurs again.
3. If the error occurs again, replace the SD card with an SD card for
another user, and turn on the main power switch.
4. If the error occurs again and again, replace the controller board.

Looks like your down to step 4. Either that or see if you can get the remote firmware and use WIM.

[davel]

So i tried everything : another SD card, resize SD, format properly, create folders : romdata -> D177 -> files
nothing works, always error : SC868-00

Attachment 42767

i would like to flash by web interface, but i only have .fwu

Is the MP C305 compatible SDHC?

.fwu files should be in romdata folder, no need ford177

[slimslob]

.fwu files should be in romdata folder, no need ford177

Incorrect

[slimslob]

Is the MP C305 compatible SDHC?

To my knowledge NO as far as firmware updates.

[mincopier]

Not sure if it was mentioned but does the code come up when the SD card is not installed?

The Google Cloud print Connector for Ricoh is sold by the local Ricoh dealer. It is not a free app.

Set up using Google Cloud Print Classic. This allows printers that are not Cloud Print ready to be used with the Google Cloud Print service. Basically a local windows computer acts as a "server" for the Google Cloud Print service. This is free.

[iscott]

In the event that the 305 is not Google Print Compatible, Try downloading one of the Ricoh print apps from the Play store. Ricoh connecter app is the newest (I think).

[Fremalea]

Not sure if it was mentioned but does the code come up when the SD card is not installed?

All is fine when sd card is not installed.

[copier tech]

All is fine when sd card is not installed.

Use a standard SD card MAX size 2GB to be sure with the .rfu files in a folder called romdata (nothing else on the card)

[Fremalea]

i only have .fwu
copier tech, you would not have .rfu files to do it from the web interface?