Results 1 to 6 of 6
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Feb 2016
    Posts
    106
    Rep Power
    20

    Ricoh Mpc 5502 developer calibration

    What is the correct procudure to calibrate the dv units.
    We have been just cleaning them out and installing new dv. and setting an sp to 1 for a new dv unit.
    Machine seems to run a little longer after I turn it back on, like its calibrating but not sure.
    My new tech said you need to do all this other adjustments and
    he cant remember which ones so I don't want him messing a machine up.

  2. #2
    Service Manager 1,000+ Posts
    Ricoh Mpc 5502 developer calibration


    Join Date
    Nov 2007
    Location
    New Jersey
    Posts
    1,661
    Rep Power
    86

    Re: Ricoh Mpc 5502 developer calibration

    The only other thing in the book is...

    If you change the development unit, do the ACC procedure.


    Execute the drum phase adjustment with SP1902-001 twice

  3. #3
    Retired 10,000+ Posts
    Ricoh Mpc 5502 developer calibration

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,132
    Rep Power
    989

    Re: Ricoh Mpc 5502 developer calibration

    As the ACC uses the ID sensors, I would recommend cleaning them first.

  4. #4
    worker drone 250+ Posts
    Join Date
    Dec 2009
    Posts
    460
    Rep Power
    40

    Re: Ricoh Mpc 5502 developer calibration

    Go into the bottom of the 3's in SP settings and turn on manual set new unit by changing to 1. Machine will reset counts and run simulations needed.

  5. #5
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    2,339
    Rep Power
    80

    Re: Ricoh Mpc 5502 developer calibration

    PM Parts SettingsBefore Removing the Old PM Parts1. Enter the SP mode.2. Output the SMC logging data with SP5-990-004.3.Set the following SPs to "1" before you turn the power off. Then, the machine will reset the PMcounters automatically. In the case of developer, the developer initialization will also be doneautomatically.4. Exit the SP mode.ItemSPDeveloperBlack: 3902-005Yellow: 3902-006Cyan: 3902-007Magenta: 3902-008Drum UnitBlack: 3902-009Yellow: 3902-010Cyan: 3902-011Magenta: 3902-012

  6. #6
    Service Manager 5,000+ Posts
    Ricoh Mpc 5502 developer calibration

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: Ricoh Mpc 5502 developer calibration

    Quote Originally Posted by kleankopy View Post
    What is the correct procudure to calibrate the dv units.
    We have been just cleaning them out and installing new dv. and setting an sp to 1 for a new dv unit.
    Machine seems to run a little longer after I turn it back on, like its calibrating but not sure.
    My new tech said you need to do all this other adjustments and
    he cant remember which ones so I don't want him messing a machine up.
    The procedure is in the service manual refer to this.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here