Thanks:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 25
Ricoh MP 2851 SC 672
I have a 672 code on a Ricoh 2851 after a long please wait condition, tried reseating connectors to no avail. Any ideas would be greatly appreciated.
-
Re: Ricoh MP 2851 SC 672
Try disconnecting the HDD first and see if it comes to ready.
If it has fax you may also have to remove that as well but try them one at a time.
-
Re: Ricoh MP 2851 SC 672
There are so many threads relating to this code for numerous models, yet you apparently haven't even bothered to look?
I can almost guarantee that any SC code you will ever come across has been discussed here - usually in numerous threads, that will provide wonderful advice to help you solve it....that's kind of the point here.
It's a very common and frustrating code with nearly countless causes; However, my experience has most often ended up being a controller - if disconnecting the HDD doesn't work.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks