Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Junior Member
    Join Date
    Jun 2019
    Location
    ismailia
    Posts
    4
    Rep Power
    0

    mp c2051 print density control

    how to control toner density in print mode to make it darker or lighter ? ricoh mp c2051
    i tried dv bias and ld power
    the only way that works with me forced toner supply many times to reach VT to 2 or less.
    i cleaned laser and id sensor
    counter 30000
    thanks

  2. #2
    Retired 10,000+ Posts
    mp c2051 print density control

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,132
    Rep Power
    989

    Re: mp c2051 print density control

    Quote Originally Posted by hani View Post
    how to control toner density in print mode to make it darker or lighter ? ricoh mp c2051
    i tried dv bias and ld power
    You can change bias levels and Laser diode power until you die from frustration and it will have absolutely no effect until you change SC 3041-001 and SC3041-002 from Control to Fixed your changes will be ignored and the values computed by Process Control will be used.

  3. #3
    Junior Member
    Join Date
    Jun 2019
    Location
    ismailia
    Posts
    4
    Rep Power
    0

    Re: mp c2051 print density control

    Quote Originally Posted by slimslob View Post
    You can change bias levels and Laser diode power until you die from frustration and it will have absolutely no effect until you change SC 3041-001 and SC3041-002 from Control to Fixed your changes will be ignored and the values computed by Process Control will be used.
    of course i did fixed process control before changing dv bias and ld power . thanks

  4. #4
    Service Manager 1,000+ Posts
    Join Date
    Oct 2011
    Location
    Hunter Valley, NSW
    Posts
    1,020
    Rep Power
    57

    Re: mp c2051 print density control

    Set back to factory settings, replace pcu’s, devs, all parts years old, worn out.

  5. #5
    Retired 10,000+ Posts
    mp c2051 print density control

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,132
    Rep Power
    989

    Re: mp c2051 print density control

    Quote Originally Posted by hani View Post
    of course i did fixed process control before changing dv bias and ld power . thanks
    In the future you need to provide any and all information as to what you have tried.

  6. #6
    Senior Tech 250+ Posts vargue's Avatar
    Join Date
    Oct 2011
    Location
    alexandria
    Posts
    405
    Rep Power
    30

    Re: mp c2051 print density control

    ياعم انت اكيد شغال بحبر تعبان عمرها محتظبط معاك كونترست

  7. #7
    Service Manager 10,000+ Posts
    mp c2051 print density control

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,669
    Rep Power
    659

    Re: mp c2051 print density control

    Quote Originally Posted by vargue View Post
    ياعم انت اكيد شغال بحبر تعبان عمرها محتظبط معاك كونترست
    CTN is based in USA...

    seems you like to post in your countries lang...

    some of here don't CARE to learn your language and unwritten rules here like to see posts in ENGLISH...

    so until you can start posting in english..

    you will continue to receive red flags and get your rep power dinged.

    this has been reported to admin

  8. #8
    Senior Tech 2,500+ Posts
    mp c2051 print density control

    mikadonovan's Avatar
    Join Date
    May 2008
    Location
    Indianapolis, Indiana
    Posts
    2,920
    Rep Power
    99

    Re: mp c2051 print density control

    Quote Originally Posted by vargue View Post
    ياعم انت اكيد شغال بحبر تعبان عمرها محتظبط معاك كونترست
    Translation:You are sure to be working in the ink of a long-tempered taban with Contrast. I don't know what a taban is, but I suppose a long-tempered one is better than a short-tempered one.
    NEVER ASSUME ANYTHING

  9. #9
    Retired 10,000+ Posts
    mp c2051 print density control

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,132
    Rep Power
    989

    Re: mp c2051 print density control

    Quote Originally Posted by Phil B. View Post
    CTN is based in USA...

    seems you like to post in your countries lang...

    some of here don't CARE to learn your language and unwritten rules here like to see posts in ENGLISH...

    so until you can start posting in english..

    you will continue to receive red flags and get your rep power dinged.

    this has been reported to admin
    I like to call him vague since even when he posts in English he is hard to understand.

  10. #10
    Service Manager 1,000+ Posts
    mp c2051 print density control

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Rome, IT
    Posts
    1,299
    Rep Power
    68

    Re: mp c2051 print density control

    are you sure there are no mechanical problems and that you have the latest firmw. uploaded ??

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here