Good day,
- This Ricoh MPC5503's color print out run. only magenta to Right and left, center Ok.
- Try to change LD, ITB, ID sensor & Magenta PCU . Same result
- Adjust Main Dot at SP Mode, 1 side ok than the other still run
any idea.
Thanks
Good day,
- This Ricoh MPC5503's color print out run. only magenta to Right and left, center Ok.
- Try to change LD, ITB, ID sensor & Magenta PCU . Same result
- Adjust Main Dot at SP Mode, 1 side ok than the other still run
any idea.
Thanks
Your colors are misaligned.
Have you tried running SP2-111-004 Forced Line Adjust?
I'd have thought that replacing the itb assy and then running full music would have set this right?
Before doing forced line position, properly clean the ID sensor assembly. I have had that alone pull colors back into alignment.
Try doing
ACC recall SP5-610-4
ACC recall SP1-101-1 in printer SP
Process control SP3-011-1
Check process control result in SP3-012-12 (should be 11111111)
Line adjustment C (or D) if it's on this model SP2-111-3 (or 4)
Line adjustment A SP2-111-1 execute twice
Then try printer test page again
Obviously make sure ID sensors are clean prior to doing this
There are 10 types of people in this world, those who understand binary maths and those who don't
IMG-20190704-WA0016.jpg After changing this broad, color back to normal. all items (ITB, ID sensor, Magenta PCU, Laser unit) put back.
Cool, you have changed the IPU.
You could have tried the steps suggested by other techs. Anyway, it's your call. $$
Aye! Cut the crap
I did have 1 machine where that would pull it back in and the next morning it would be off again. Machine was only a couple of weeks old so I called our regional rep and he said that Ricoh had been having some problems with ITB slippage. He sent me a new ITB assembly and problem went away.
Bookmarks