Calibrate print colour poor

[Hong1007]

Dear all,

May i ask after i do a memory clear (all), the calibrate for print colour is very poor. May i know how to slove it.

Many thanks

[DonPedro]

Hi
After clear all you need to enter values from non-default page. Next step is initialize TD sensors, force line adj., toner density adj.

[COPIERMAN]

all memory clear is last thing you what to do. also if you don't have information sheet from when it was first setup then every setting has to be readjusted. You didn't say how many copies on the color units. Could had been they are wore out and need to be replace. Good luck you might have cause yourself more headache.

[copiertec]

Dear all,

May i ask after i do a memory clear (all), the calibrate for print colour is very poor. May i know how to slove it.

Many thanks

For what reason did you perform a memory clear all? Agreed with copierman... you may have just opened a can of crap.

[slimslob]

Hi
After clear all you need to enter values from non-default page. Next step is initialize TD sensors, force line adj., toner density adj.

The idiot will probably print the current non-default and try to us it.

[sandmanmac]

Dear all,

May i ask after i do a memory clear (all), the calibrate for print colour is very poor. May i know how to slove it.

Many thanks

download.jpg
That is all........

[keithxxiii]

35dwmx.jpg

[DonPedro]

The idiot will probably print the current non-default and try to us it.

I hope he knows where is placed non-default sheet in copier.

[slot]

i have sent you a PM

[copier tech]

Run force line position C then A SP2111

If you really need to do an all clear be sure to back up the nvram first.