Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    Service Manager 1,000+ Posts
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,483
    Rep Power
    44

    MP 6001 with exit jams

    greetings.
    I have this mp6001 that was giving random duplex jams and now it is jamming 014 as the paper exits 2/3rds out.
    It is random but i tried different paper trays and pulled the drum,cleaned the sensor near the reg roller,all fuser sensors and had recenly change LFR/UFR
    and all fuser gears.Lead edge is spot on.
    It looks like the exit motor is just stopping??

  2. #2
    Senior Tech 100+ Posts
    Join Date
    May 2015
    Location
    queens ny
    Posts
    170
    Rep Power
    11

    Re: MP 6001 with exit jams

    Check the guide plate between the fuser unit and the duplex unit. Its the one that flaps back and forth when you pull out the duplex unit. There is a pin on the shaft that keeps the guide plate snug when its in the close position. Sometimes the part that the plate meets with the pin cracks and causes the paper to misfeed on the way out.

    Good luck

  3. #3
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    9,470
    Rep Power
    206

    Re: MP 6001 with exit jams

    Is there a second sheet of paper that is just exiting the fusing unit? J014 is a lead edge fusing exit jam. Fusing exit sensors have been known to fail intermediately from prolonged exposure to heat.

  4. #4
    Service Manager 1,000+ Posts
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,483
    Rep Power
    44

    Re: MP 6001 with exit jams

    it is usually one sheet 2/3rds out,no oddities and 1-2 sheets near the transfer belt.
    if it didnt reset jam i thought bad sensor but it resets and will run..
    I never had a exit motor go bad and i am replacing this box in 24 days when i can get into the building on a
    Saturday,it s in a very busy area nr 911 museum..

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Jul 2015
    Posts
    76
    Rep Power
    9

    Re: MP 6001 with exit jams

    if it has 3 mil or more i would replace the transport belt. it could also be the drum seperation claw unit.

  6. #6
    Service Manager 1,000+ Posts
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,483
    Rep Power
    44

    Re: MP 6001 with exit jams

    thanks.
    It has less than 3 mil
    Image transport belt is what you suggest?
    I am going back tommr.will pull the ITB unit and was
    wondering is there only motor for fuser and exit?


  7. #7
    Field Supervisor 500+ Posts
    Join Date
    Oct 2011
    Location
    Sydney
    Posts
    544
    Rep Power
    25

    Re: MP 6001 with exit jams

    X2 for exit sensor

  8. #8
    Just a tech 250+ Posts keithxxiii's Avatar
    Join Date
    Nov 2014
    Posts
    338
    Rep Power
    15

    Re: MP 6001 with exit jams

    X3 for the exit sensor.

    BTW, does it happen on all trays? Quite odd but I had martinis giving wrong paper jam code but the culprit was the paper feed unit gears.
    Aye! Cut the crap

  9. #9
    Field Supervisor 500+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    905
    Rep Power
    26

    Re: MP 6001 with exit jams

    I've had this issue also, just before i lost the client due to this problem.
    I never solved it.
    I've tried every trick in the book (and from this site)
    Good luck!

  10. #10
    Service Manager 1,000+ Posts
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,483
    Rep Power
    44

    Re: MP 6001 with exit jams

    Quote Originally Posted by davel View Post
    X2 for exit sensor
    is that the one wth the flag or a reflector type sensor?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here