ricoh mpc6502 access to web error 403 forbidden looking forward for help

[levantin]

ricoh mpc6502 access to web error 403 forbidden looking forward for help?

[keithxxiii]

print interface settings and check for access control.
or lower down network security level to 0.

this has similar topics answered on this site.

[levantin]

print interface settings and check for access control.
or lower down network security level to 0.

this has similar topics answered on this site.

Can you only use yourself?

[slimslob]

Did someone try to create a device certificate? An improper device certificate will cause your error. If so try resetting NCS, SP 5801-11.

[levantin]

Did someone try to create a device certificate? An improper device certificate will cause your error. If so try resetting NCS, SP 5801-11.

I have tried but it's failed. and tried 5801-01 yes

[slimslob]

I have tried but it's failed. and tried 5801-01 yes

If you ran 5801-01, I hope you have the birth certificate.

[skinnyb]

If you ran 5801-01, I hope you have the birth certificate.

Exactly. If you did 5801-01, the lack of Web Image Monitor access is the LEAST of your worries now...

Sent from my LM-V405 using Tapatalk

[Phil B.]

I have tried but it's failed. and tried 5801-01 yes

no Slim said 5801-11 not 01...

01 can be a MAJOR HEADACHE .. do you have a service manual?
or at LEAST the list showing SP mode definitions?
as mentioned, you are in for a TON of work -=IF=- you have no service manual

5801-01 should be THE very last resort.

[KenB]

no Slim said 5801-11 not 01...

01 can be a MAJOR HEADACHE .. do you have a service manual?
or at LEAST the list showing SP mode definitions?
as mentioned, you are in for a TON of work -=IF=- you have no service manual

5801-01 should be THE very last resort.

Especially on a color machine. Good grief.

[keithxxiii]

I have tried but it's failed. and tried 5801-01 yes

here we go again...
download.jpg

You could have waited for other inputs. Well, good luck putting back the values though