Thanks: 0
Likes: 0
Dislikes: 0
I was wondering if anyone could get me a part number on the two gears inside the PFU for this machine. They are located inside the feed unit showin in the picture below. I need both gears and can't seem to locate a part number for them but I found the other part that I need. Any help would be greatly appreciated. The gears are the belt driven gears that go on the side of the frame.
A859 2167 and G412 3831
- Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.
Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother
Thanks for the help Cipher, but now I have a new problem. I got the gears put in with the new frame unit but I don't have the test modes for the machine. I just need to test it to see if it will feed paper. Is there any kind of SVC mode code to get in there just to make the ADF unit feed a few sheets I can use?
Flicking dip SW8 to 'on' sticks the machine in demostration mode.
- Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.
Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother
Reply With Quote
Bookmarks