Hi,
I have problem with SR 970 finisher, fuse always blow during copy process.3 times already happen the problem.anybody have idea on this.
Hi,
I have problem with SR 970 finisher, fuse always blow during copy process.3 times already happen the problem.anybody have idea on this.
Is it only when you sort or only when you staple?Have you looked for a short in any of the harnesses?Try and narrow it down a little more.Run the finisher in the output modes and see if the same thing happens
Unplug the punch and make sure paper can pass thru.Then see if you can run the finisher.If it works then you know the punch is bad.May just be the driver board.
I had a stapler harness get caught up frayed and shorted - very tough to see without a deliberate inspection.
73 DE W5SSJ
Thanks guys for the ideas.
Let us know what you find out.
Bookmarks