Dislikes:
0
-
Pro c7200SL
Hiya folks. No issue just thoughts on the pro c7200sl. It’s not got the 5th station and done 350k colour and 200k black. All is fine for now but never really been to service one of these but now on my patch.
Anything to look out for?
Hope you are all having a dandy weekend. Tim.
-
Re: Pro c7200SL
If you are already working on Pro C7100, then you will be fine. If you're not experienced on Pro C7100, then you are probably going to have a rough go.
-
Re: Pro c7200SL
Hiya.
I don’t have the experience but do on the Pro 8100 loads and the 6503/8003 range which I know are different but the drums etc and cleaning bits I expect to be familiar to me. Been a tech since 1991 so should pick it up.
it’s why I asked about the machine to see if there are any quirks or something to do which we tend to do in machines knowing they run better like that. I never had training on the 6502/6503 range which then went to the 8003 range but know it back to front and what data to change to get more miles out of the toner and to stop the toner collection filling up like mad.
Does the 7200 eat the toner and fill the collection bottle like mad? :0)
thansk for looking by the way. Tim.
-
Re: Pro c7200SL
Hi,
I had a lot of Pro C 751 and now 7100.
For me the best machines ever. My customers printing 1to 1.5 millions of copies per year.
If you change parts due to PM you will have very little problems.
Considering your experience you wont have too much problems.
Could you explain how you do this?
"range but know it back to front and what data to change to get more miles out of the toner and to stop the toner collection filling up like mad."
-
Re: Pro c7200SL
Agreed with bojans. Do not skimp on anything PM wise and it will run like a tank. Keep on top of the firmware too.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks