Hair oil... LOL!
No, No... sorry, Brillianize #1 Rated Plastic Cleaner and Plastic Polish
As for the part number of the new dev unit... D009-2301. Hope that helps.
Hair oil... LOL!
No, No... sorry, Brillianize #1 Rated Plastic Cleaner and Plastic Polish
As for the part number of the new dev unit... D009-2301. Hope that helps.
The first law states that energy is conserved: The change in the internal energy is equal to the amount added by heating minus the amount lost by doing work on the environment.
Yep, that helps lots. I've just ordered one and I'll see what turns up,
As for Brillianize I'll have a hunt around to see if there is an Oz vertion of it.
By the way Unisys, since its 1.30 PM Thursday arvo here it must be about 10.30 PM Wednesday night where you are. What are you still doing thinking about photocopiers that late at night for? Have you considered that you might need help? Try getting out more often and meet some normal people! Cheers, Phil.
At least 50% of IT is a solution looking for a problem.
There is also an update for the older model 35/45 if anyone has been fighting those as well (like me)
Lanier LD335/445
Ricoh MP3500/4500
tsb 14
New dev unit B2133011
new dev sleeve only (mag roll assembly) B0823101
Have you had any success replacing just the mags on the 3500/4500? I have a few of these that are just pukers, even after having the new mags put in. Also been doing everything else recommended (vacuuming the waste section, bias adjustments and paper between the units when adjusting dev). I've even been lowering the fuser temps and lowering the energy save and auto off timer settings. Grrrrrrrr.
What are the differences between the old and new developer units?
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
IDK. I assumed it was just the new mag assy.
Al, were you asking about the 3500/4500 or 4000/5000?
Ok, just replaced the dv unit and the drum unit on a MP 4000 three weeks ago and havent heard back yet from them.Hated to replace both but that is what it took to repair.Tried the dv unit first but no good.Took both to make it all good.
Dont know if the new mag unit is the cure for sure but taking both to make it run after 80k and keep the customer happy is all i know to do right now.
Ricoh needs to be on the ball after this series if they want to be any help to the dealers they "still" have.
Bookmarks