I have never seen the error code. Maybe your friend should call a tech.
I have never seen the error code. Maybe your friend should call a tech.
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
he is a technican and ask mi this favore. he called at ricoh italy and they answered to change the logik board.i cant believe it.first the fax works fine then he trys to force the toner counter at least it hang up in this contitions
Good, it's completely useless to do the following: "DOWN + # + 0". For the message "init for Watting Card". The equipment will only boot up with the card's boot device, and not the card Tonner.
Card boot, comes with new equipment. You should then be saved for future launches.
If you dont have this card, you should ask your representative, the same.
Umm Nod, I think Harry left like 5 months ago.
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
It was only to clarify the doubts, not only for Harry, but for everyone.
I had one of these do this once. The main board in the machine has packed up and it requires a new one.
It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.
For information,
I have 2 machines with this problem.
I couldn't solve this problem.
SP1000sf have some similar machine another brands - Sagem MF5461/5481, Xerox 3100MFP, OKI B2500.
I found the information about INIT CARD in the user manual on Sagem, see attachment file.
INIT CARD is installation card that supplies with machine but only on Sagem.
This message appearing only if you execute "arrow down", "8", "5" and "arrow down", "#", "4", p.104 SM.
Never perform this "Erase the consumable counters".
Update the firmware to latest version (Ricoh delete this function from service mode).
Thank you at all
I wish everyone a happy New Year and a holly chrismax
Turn at work My Friend replace the logik board maybe the only thing to get it work.
Thank you at all
The same problem I have when flash with new firmware (1.06b). Than I put down firmware to with V + # + 0 but the same :
Wait for init card. Any sugestion?
To refresh the topic, after 5 years.
In the T & B for this machine I found that there: H320 9500 - Smart Card Maintenance.
Did anyone used this and how? (Because in SM not a word about it).
Any response?
Bookmarks