Thats true.
Thats true.
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
The amount of old toner contained in the developer probably won't make much difference, as there really isn't a whole lot of developer total in the machine, and toner makes up a fairly small part of that developer, so it will be rapidly diluted by the new stuff.
73 DE W5SSJ
With this mod, is there a way to disable the web end counter and sensor detection?
Probably not, but you can max out the interval and min out the drive time
73 DE W5SSJ
Has anybody been running the fuser mod? I'm interested in what kind of results everyone has been getting.
73 DE W5SSJ
This is what the latest firmware release is doing...0 everywhere. I'm curious if will fix my premature web depletion problem.
About the mag roller...it's no bulletin released...I just checked the TSC site.
It's a bulletin about the new toner and how to set up the voltages and a new part number for the dev unit.
For 3500/4500 Ricoh released a new part number for the dev unit B2133011 and a new pn for the mag roller B0823101
I installed my fuser Mod the other day. Web end actuator was removed so it shouldn't kill the machine. Once installed it printed 500+ duplex with no repeat image. Hot roller already had 250K on it. Another tech stopped and check it today and was still going....
Dave
Kittens give Morbo gas.
A+, Network+, Server+, PDI+
Bookmarks