Each time u open any door I get adding toner. Sounds like its from the blk toner. replaced pump, dv assy, drum, irf pcb. Cleaned pipe and toner hoppers. Still getting it. No spillage in mch. mch works fine after it thinks its loaded.
Each time u open any door I get adding toner. Sounds like its from the blk toner. replaced pump, dv assy, drum, irf pcb. Cleaned pipe and toner hoppers. Still getting it. No spillage in mch. mch works fine after it thinks its loaded.
Relax! This firmware injection won't hurt...but it will take 45 minutes.
Thank you for your reply.
It is the black toner that is trying to load.
Maybe a dumb question, but did you try another toner?
Thank you for your replys.
I have already replaced the toner and striped and cleand toner end sensor.
if after replacing toner bottle, opc, toner pump, dev assy and still its loading toner? how about not just cleaning the toner end sensor, replace it if could help... i assume that sp modes are not change... sp 3 102= 5 try to adjust..... good luck...
fix the customer first then fix the machine... its simple and makes life more easy.
I have a similar problem - machine is loading toner after every closing the door etc., but in addition ... in SYSTEM STATUS you can see toner bottles are full although they are empty actually. All colours.
Have you tried upgrading/reloading firmware?
Don't take that toner with me!
Thank you all for replying. UPDATE: Have upgraded firmware. Changed toner end sensor. Waiting for controller PCA to come. OH..have also relaoded ROM Data.
Bookmarks