Ricoh Aficio MP C4500 User Code Management

**b1406** · 02-05-2011

Originally Posted by tcs04

If you're not trained, you should be VERY careful doing firmware. If you ARE trained, You can get an account!!!

I`m not trained but the machine is broken and to be fixed I`cant get an account form tessa
thats why I`m asking here for help

**tcs04** · 02-05-2011

How do you know firmware is the problem?

**randula7** · 06-24-2013

Dear all
how can I setup user codes stop print & copy's when user reach 2000 print or copy's on mpc4500 machine.

**techsass** · 06-24-2013

There's an app. called User Account Limits that you can download from the Solutions page under the Security portion. It requires a Java card.

**randula7** · 06-26-2013

Originally Posted by techsass

There's an app. called User Account Limits that you can download from the Solutions page under the Security portion. It requires a Java card.

if anyone have User Account Limits Application for MPC4500 please help me my email randula7@yahoo.co.in

**copyplus** · 08-25-2015

I just picked up a Ricoh MP C4500. When I try to change the IP address or any other function it says that you do not have the privilege to use this function. I tried to login with admin and blank password, 12345 password, xxxxx password, nothing worked, authentication failed. Would anyone help me to use the administrative functions of this machine. User authentication management under admin tool is off.

**NeoMatrix** · 08-25-2015

Login in as supervisor and reset the administrator password.

**copyplus** · 08-25-2015

Thank you very much. It did work. Now I am having problem to network this machine. I did set up IP address in the machine and in my router. When I send a print my computer communicate with the machine and tells me that the machine is low on toner but does no print. Any suggestions? thanks

**NeoMatrix** · 08-25-2015

Originally Posted by copyplus

Thank you very much. It did work. Now I am having problem to network this machine. I d
id set up IP address in the machine and in my router. When I send a print my computer communicate with the machine and tells me that the machine is low on toner but does no print. Any suggestions? thanks

Put in a new toner the machine, it should automatically restore the toner level an allow normal operation.
You can disable the low toner detection in service/sp mode, but you will still require a new toner.

Is there a print/scan SDcard installed in the machine ?

**copyplus** · 08-26-2015

The cartridge is not 100% empty. It just shows low and the machine makes copies but only the print from the computer is not working. The machine has network, scan, fax and print options. thanks