ok i have a card that "should" work is there any special formatting involved or is it plug and play now?
if it is special can someone make a clone image of your card and send it to me?
ok i have a card that "should" work is there any special formatting involved or is it plug and play now?
if it is special can someone make a clone image of your card and send it to me?
What kind of card are you talking about? Firmware update? 4M or 64M?
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
its a pcmcia compact flash adaptor that im trying to make work
Is this what you looking for:
MCERICOH - XP V1.00 Demo
credits to Ricoh-ono
We can all Win, but at the end we all loose. Save the greyhound
nope it wont install so im useing elan memeory card explorer i just need to know how the card needs to be formated to work in the copier
Is it the recommended 4MB Card? If not good luck. I had a co-worker spend days trying to make a generic card work with no luck. Several of us even offered to loan him one of our cards but his bullheadedness was determined to MAKE that card work. In the end the correct card was used.
As for the format I have never formatted a pcmcia card for firmware. It writes in binary to the card. The only thing I always do is set it to erase the card before writing the new data.
Here is the help file for the Ricoh MCE.
Relax! This firmware injection won't hurt...but it will take 45 minutes.
no the card is a generic pcmcia compact flash adaptor
my boss dosent want to pay close to $200 for the right one and he got this one for $15
so is there any chance this thing will work? lol
Bookmarks