Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 5 FirstFirst 12345 LastLast
Results 11 to 20 of 42
  1. #11
    Trusted Tech 50+ Posts
    Join Date
    Jun 2009
    Posts
    55
    Rep Power
    30
    Not a problem just hope it helped.

  2. #12
    jcgit
    Guest

    ScanRouter version 2.6??

    Does anyone know where I can get version 2.6 from. I am trying to use this with Windows XP and a Gestetner DSM415sp. I had it working on Windows 2000 machine. The version I am using is version 2.0.6.0. Any help is appreciated.

    Quote Originally Posted by IDSTechnical View Post
    Setting up scanrouter lite is quite easy so long as you have the correct information up front.

    Firstly make sure your using the last version 2.6.0 this is the only one I have found works with XP pro correctly.

    I have attached a RIcoh white paper if your installing on SP2 or later and have the firewall enabled. Follow pages 18 for scanrouter pro, if you don't you may get so far but no scans.

    1. So first do the install from setup.exe
    2. then follow pages 18 re scanrouter pro form the attached white paper
    3. Open the admin tool and from the server menu go to set I/O device
    4. choose add and enter the ip address of the copier
    5. scanrouter will ask for a name for this copier (this must be unique for each mfd)
    6. then in the destination table right click and choose add new user
    7. follow the on screen prompts to scan to a windows file
    8. you should be able to set the type to pdf here also.

    When setting up the scanrouter options (IO device & destination table) the software communicates with the MFD. You shouldn't need to do anything on the MFD in most cases.

    The address book tool in SDM for admin will allow emails, fax and folder destinations to be programmed into a machine supporting an internal address book. 2022/2035 onwards from memory. The 1045 does not have an address book so I dont think will help in this instance.

    Not exactly step by step but from my memory this should give you enough to get you up and running ok. Any problems feel free to email me anytime.

    James

    P.S. 1045 has got to be due for an upgrade by now then you can do away with scanrouter forever!

  3. #13
    Trusted Tech 50+ Posts
    Join Date
    Jun 2009
    Posts
    55
    Rep Power
    30
    Can you elaborate more on what problems you are getting?

  4. #14
    jcgit
    Guest
    I just fixed it a few minutes ago, I was making the wrong startup selection during the install of ScanRouter.

    Quote Originally Posted by IDSTechnical View Post
    Can you elaborate more on what problems you are getting?

  5. #15
    Trusted Tech 50+ Posts
    Join Date
    Jun 2009
    Posts
    55
    Rep Power
    30
    Excellent!

  6. #16
    Geek Extraordinaire 2,500+ Posts KenB's Avatar
    Join Date
    Dec 2007
    Location
    Cleveland, Ohio
    Posts
    3,949
    Rep Power
    126
    FYI...

    There is no such thing as version 2.6.

    The last release was 2.0.6; people tend to omit the "0" in the middle.

    Also, please don't look (or hope) for any future versions to be released, as this product is no longer supported.
    “I think you should treat good friends like a fine wine. That’s why I keep mine locked up in the basement.” - Tim Hawkins

  7. #17
    Trusted Tech 50+ Posts
    Join Date
    Jun 2009
    Posts
    55
    Rep Power
    30
    Quote Originally Posted by KenB View Post
    Also, please don't look (or hope) for any future versions to be released, as this product is no longer supported.
    This is not a bad thing

  8. #18
    vartaxe
    Guest
    i have a ricoh aficio 1027 does scanrouter v2 lite work on windows server 2008? thanks for helping.

  9. #19
    Senior Tech 100+ Posts
    Join Date
    Jul 2010
    Posts
    106
    Rep Power
    0
    I have a problem to connect MP171 with scanrouter.
    When I try to connect MP 171 with scanrouter "set I/O device, add.., browse..," the machine is present on I/O list, but when I click OK, I get a message "The selected I/O device is not switched on, or is not available on this network", but MP171 is turned on and printer is working.
    It is the same if I write IP of machine instead of browse.
    I also connect MPC2000 with the same procedure and I don't have any problem.
    Got any idea what could be wrong?

  10. #20
    Senior Tech 2,500+ Posts
    Richo ScanRouter v2 Lite Setup Help

    mikadonovan's Avatar
    Join Date
    May 2008
    Location
    Indianapolis, Indiana
    Posts
    2,920
    Rep Power
    99
    This document may be of some use to you.
    Attached Files Attached Files
    NEVER ASSUME ANYTHING

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here