Setting up scanrouter lite is quite easy so long as you have the correct information up front.
Firstly make sure your using the last version 2.6.0 this is the only one I have found works with XP pro correctly.
I have attached a RIcoh white paper if your installing on SP2 or later and have the firewall enabled. Follow pages 18 for scanrouter pro, if you don't you may get so far but no scans.
1. So first do the install from setup.exe
2. then follow pages 18 re scanrouter pro form the attached white paper
3. Open the admin tool and from the server menu go to set I/O device
4. choose add and enter the ip address of the copier
5. scanrouter will ask for a name for this copier (this must be unique for each mfd)
6. then in the destination table right click and choose add new user
7. follow the on screen prompts to scan to a windows file
8. you should be able to set the type to pdf here also.
When setting up the scanrouter options (IO device & destination table) the software communicates with the MFD. You shouldn't need to do anything on the MFD in most cases.
The address book tool in SDM for admin will allow emails, fax and folder destinations to be programmed into a machine supporting an internal address book. 2022/2035 onwards from memory. The 1045 does not have an address book so I dont think will help in this instance.
Not exactly step by step but from my memory this should give you enough to get you up and running ok. Any problems feel free to email me anytime.
James
P.S. 1045 has got to be due for an upgrade by now
then you can do away with scanrouter forever!
Bookmarks