As the original poster of this thread, here are my thoughts. Got to give something a try with these beasts, the mod did give some temporary relief - however overfilling of devs is a problem. My advice is that removing the cam can cause overfilling and as such is not a fix for the low density issues. I have just attended one of the hundred or so 6501/7501 models that I now have to look after - waste bottle full 24708 bw total and 18929 Col total, cyan dev spilling ferociuosly and other devs all spilling - and other faults to boot. Looking back the 7500/6000 models are excellent machines that give very little trouble.
Bookmarks