Thanks:
0
Dislikes:
0
-
Technician
- Rep Power
- 27
Re: mpc 2500 sc 565
Check the thermostat pressure roller can be wide open or bad fuser connector.
-
Re: mpc 2500 sc 565
Hi, thanks for replying.
Problem is now a bit mute as replacement machine was
£250 working and installed. Will try advice when time allows.
-
Junior Member
- Rep Power
- 0
Re: mpc 2500 sc 565
I have had the same code on the C3300. After rebuilding the complete fuser, the pressure roller was melted stuck to the fuser belt, then SC 565 causing dual thermostat to open. Turns out the pressure roller thermistor wasn't touching the roller causing melt down. I bent the metal bracket holding the thermistor up toward the pressure roller for contact.
The metal bracket holding the thermistor is cheap metal, easy to bend causing this problem.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks