2 marks in the center of the page

[dckm]

I have an Lanier LD433, that puts two marks on the trail edge of the paper. It is coming from the drum scrapers. I stopped a copy mid cycle, and it happens before fusing. It also does it on a counter sheet. The line right up to the drum scrapers, but they are clean. I replaced drum and developer, and they are still there.

Anybody ever see this?

[mackattk]

Remove PCU, disassembled to the mag roller; a scratch on the mag roller surface or paper dust fibers can cause the marks on every thing printed (intermittently)

[Llama God]

Do you have a sample?

[rthonpm]

Check the transfer roller and see if it has marks on it that line up to the ones from the drum fingers. If so, replace it.

[ZOOTECH]

Well, I hope the OP has fixed it by now (2.5 years ago).

[Oze]

Well, I hope the OP has fixed it by now (2.5 years ago).

BUAHAHAHAHA....so a "junior member" trawled the forum...saw the post and commented...hehehe.
Would've had to dig to find the OP too

[ZeusGT]

LOL.... Nice!