Hi guys, i have said machine giving this code, when i remove all drums after the code is shown, they are all covered in there respective toners, the machine attempts to start then goes off after 1 second of drive, i know its an ac charge issue and i have checked the rear spring and swapped the yellow drum unit....but still i get this code. I have taken out the charge board to try in another machine. Do these boards go down often? and has anyone else had sc 300-303 codes?
-
Networking skills are advantageous but use of a 3m vacuum cleaner is essential
-
Well if you fixed the spring and tried new pcu with charger, sounds like power pack is bad. I have over 30 of those machines and never have seen that codeIBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications -
it was the board afterall!!!Networking skills are advantageous but use of a 3m vacuum cleaner is essentialComment
-
-
It'd be the HV board, it sits behind the PSU.It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.Comment
Comment