Thanks:
0
Dislikes:
0
-
Had one with an SC550 once (web out) that did not display on screen but did show up in the SC SP. I re-set web counter to zero, powered off/on and it came up fine, no more "Please Wait". Then re-set web counter to what it was before and all was well.
-
Trusted Tech
50+ Posts
- Rep Power
- 30
Hi again,
Thanks for all the support.I will check the codes.
Have a good night.
Tech boy
-
Technician
- Rep Power
- 30
Check SP 3-904 and set it to " 1 " this will give you a short warm up and a shoerter process control.
-
Trusted Tech
50+ Posts
- Rep Power
- 30
thanks for the info,
What will this shorter warm-up and process control do?Will this help this "please wait" from happening again?
Thanks
Tech boy
-
Technician
- Rep Power
- 30
There was a hit on gooses for this and it seems to have worked for me in the past
-
Technician
- Rep Power
- 19
Re: Ricoh 2075 "Please wait"
-
Re: Ricoh 2075 "Please wait"
set sp 1104 to "0"
set 3-904 as follows
if it "0" set to "1"
if it "1" set to "2"
if it "2" set to "1"
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks