Ricoh 2075 "Please wait"

[rictech]

Had one with an SC550 once (web out) that did not display on screen but did show up in the SC SP. I re-set web counter to zero, powered off/on and it came up fine, no more "Please Wait". Then re-set web counter to what it was before and all was well.

[TECH BOY]

Hi again,
Thanks for all the support.I will check the codes.
Have a good night.

Tech boy

[paperclipsandbubblegum]

Check SP 3-904 and set it to " 1 " this will give you a short warm up and a shoerter process control.

[TECH BOY]

thanks for the info,
What will this shorter warm-up and process control do?Will this help this "please wait" from happening again?

Thanks
Tech boy

[paperclipsandbubblegum]

There was a hit on gooses for this and it seems to have worked for me in the past

[Mocafer]

: D: D
Thanks!!!!!

[khattab.al.masry]

set sp 1104 to "0"
set 3-904 as follows
if it "0" set to "1"
if it "1" set to "2"
if it "2" set to "1"