Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: af2075

  1. #1
    Field Supervisor 500+ Posts
    Join Date
    Jun 2007
    Posts
    556
    Rep Power
    27

    af2075

    please wait upper left of screen. repl-2 new hdd's reformatted and stamped them but no luck. i can make a copy and quickly make another copy and another if i am fast enough, but when i wait 3 seconds it goes into a please wait and will not come out. i can turn the machine off/on then it will come to ready again, but iif i make a copy and wait 3 seconds it will do it again. not the initial please wait but the one in the upper left where the screen says ready. help appreciated. thanks t


  2. #2
    Senior Tech 1,000+ Posts
    af2075

    mikadonovan's Avatar
    Join Date
    May 2008
    Location
    Indianapolis, Indiana
    Posts
    1,941
    Rep Power
    48
    You may have already done this, but it sure sounds like a firmware problem. Also, I had a 2051 that I adjusted the metal plate on the front of the machine that secures the fuser in place. I had moved it about 2 mm too far to the left and got the same "please wait" indication. Hope this helps

    NEVER ASSUME ANYTHING

  3. #3
    Technician
    Join Date
    Jan 2010
    Posts
    11
    Rep Power
    17
    how old is the developer. try new developer. it might be from td sensor.


  4. #4
    Field Supervisor 500+ Posts
    Join Date
    Jun 2007
    Posts
    556
    Rep Power
    27
    Quote Originally Posted by brij View Post
    how old is the developer. try new developer. it might be from td sensor.

    it was the fuser guys. replaced all the lamps, stats and stors, thanks much T


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here