FYI the DRB board also drives motors in the duplex unit and possibly other areas too, so its possible that a motor in these areas could be the cause of the code
FYI the DRB board also drives motors in the duplex unit and possibly other areas too, so its possible that a motor in these areas could be the cause of the code
UPDATE: I went out to the machine this morning, unplugged all options :adf, finisher, pulled fuser out and left door open. I put a new fuse in, powered up and it blew. So I am order a lamp and scanner regulator board. I am looking for this board's part number. I have found what is called a SDRD board # B0655180. Is this the correct board??
If anyone has any tips/advise I would appreciate it. Thanks again for all the responses.
MACHINE FIXED!! I ordered a SDRB board (the board that controls the scanner driver motor), an exposure lamp, and a drive motor. When I got to the machine I pulled the SDRB board to see that it was fried. I relplaced it and as a precaution I replaced the motor and lamp. Powered up machine after replacing FU 107 and no code. She ran like a top!! I think something was going on with either the scanner motor or the lamp causing the board to burn up like it did. What a great way to end a Friday, fixing a machine that I have been getting my ass kicked by since Monday. Thanks again for all of the input!!
Sweet. Glad to know you got the bugger fixed.
It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.
Hi, im going to look at one of these today, does anyone know of the top of their head what sort of fuse FU 107 is?
im looking for help for my machine ricoh pro c900s showing this code im not a tech im getting ready to ship it overseas want to fix it before i do so also there are little things that's need to be set by numbers
Bookmarks